22RPD N51B30 - Stage 1 Tune

We are now working directly with 22RPD, this tune can be purchased on their website-

https://22rpd.com/shop/tune/36

--

Stage 1 Tune - Our stage one tunes set out to maximize the power, refine the smoothness, and provide ultimate responsiveness of the engine at all operating conditions. Stage 1 tunes are designed to be used with mild engine modifications, but require no modifications to operate effectively. Our stage 1 tunes open the door for personalization and customization. No “cookie-cutter” or “Off-the-shelf” tunes here! Build your personalized tune with the stage 1 tune options below!

All of 22RPD's tunes are comprehensively developed in-house to provide the most refined tune and the highest output possible per platform available anywhere. We spend the time to be the expert so you can rely on us to take your street or race BMW to the next level.

We take a comprehensive approach to tuning; this means we work with the whole system to find the most power, best throttle response, and highest drive-ability around.

We are pleased to provide these packages for your BMW.


*ECU exchange note, we can only bench flash the MSV70, not MSV80.


Looking for more configuration options? Check out our Stage 2 tunes!

Please write your desired tune options, fuel octane, and car modifications in the special instructions notes during checkout 

Tune options – These configurable options allow customization of the tune package to your specific needs. Below we describe each option.

Add Burble, Crackle, and Flames – This option, when available, provides audible pops and crackles under engine deceleration. This acoustic performance is heavily dependent on the installed exhaust. In some cases this can be harmful to the engine and or catalytic converters.

Burble Setting Options-

-Popcorn

-AC Activated Popcorn

-OEM+ (335is Style)

-Gunshot (Stage 2 Catless only)

Alpha-N – This option, in general, removes the MAF from the operating calculations. In general is used with intake stacks or intake boxes. In some cases it can provide higher performance but in general this should only be selected when absolutely necessary as it can exhibit rough running conditions in situations where the ecu doesn’t have enough information to perform better. 

LWFW Idle Bump – Select this option if you have installed a light weight flywheel and want us to bump the idle to smooth out idle noise.

Rev Limiter Adjustment – Select this option if you are looking to have us move the rev limit up. (Not compatible with GM automatic transmissions, only compatible with manual or ZF automatic with XHP Stage 3 in manual mode)

Top Speed Limiter Delete – Select this option if you are looking to have your top speed limiter deleted. 

Hard Limiter - Select this option if you would like a hard cut rev limiter instead of the soft limiter. (On automatic transmission cars, the hard limiter will only be applied in Park and Neutral, not in gear)

Low Temp Map Thermostat - Select this option if you would like to lower the set operating temperature of the water thermostat.

Tune Delivery option - Tunes can be provided or delivered through many means. When you purchase your tune you can select how you will receive you product. See the section below for a description of each option.

Possible Delivery Options:

Digital Delivery - Select this option if you already have a non vinlocking flashing cable. Software will be sent to you via email.  Must be a 22RPD or BimmerGeeks Cable.

Ecu Exchange - This Tune delivery option requires removal and mailing of your ecu to us. We will upgrade the software on your ecu to our performance calibration and return the ecu back to you via priority mail. The process takes 1-2 days plus mail.

In-Person Tune - This Tune delivery option requires bringing your vehicle to our facilities. Once on site, we will take your car and upgrade your ecus with our software. While on site we can provide dyno comparisons and specific dyno tuning. 

Remote Tune - With this Tune delivery option we mail hardware and provide tuning software to upgrade your Ecu calibration to our performance calibration. Everything is generally handled by our engineers requiring only an internet connection and a windows laptop. Complete instructions will be included with your tune package.